Bottlestore.com maintains one of the largest inventories of glass jars wholesale for sale online. If you’re looking for glass jars with lids wholesale, we can deliver an enormous variety of combinations to suit your packaging needs. We maintain a continuous stock of the most widely utilized glass jars in production today, including sample round, paragon round, mayo jars, low profile cream round jars, and economy round. All of our glass jar products can be purchased with pre-tested and pre-fitted plastic or metal screw on closures depending on your product's specific application. For customers interested in purchasing large quantities of glass jars with lids bulk, pallet quantity discount and customized freight quotes are available.
If you are looking for more details, kindly visit Bense.
Updated – February, 2022
We often hear from folks who have some bottles and jars but need some new lids in order to re-use or re-purpose them. This post will provide guidance on how to measure glass jars and lids to determine what size lid the jar needs, or vice versa. This post primarily addresses how to measure a jar in order to determine it’s finish measurements. If you need help deciding which type of lid/jar combination may best suit your needs, you will want to check out A Guide to Commercial Canning Lids or How to Choose a Canning Lid. If you are planning to sell your product, we recommend Food Processing Resources to help you on your journey.
The specific measurements (all of them!) of the jar finish and of the lid finish matter. Be sure you are choosing a lid compatible with your jar by browsing from the “Accessories” tab of the jar in question. We link them in this way to avoid order errors. If you need to verify, be sure to contact our customer service team before ordering.
First, it’s important to know that these are the two primary types of containers and closures currently used in food packaging.
Continuous-thread (CT) is the Mason-style closure mechanism where the jar and lid are both threaded in one continuous bead around the entire circumference of the opening; also referred to as “screw-on”. The skirt (the part that comes down around the mouth of the jar) of these CT lids can vary. Generally, typical mason jars have a 70/450 finish and would require that size of lid. However, there is also a “short skirted” CT finish; with a 70/400 finish. We show examples of these later in the post.
Lug is the closure system where the container has multiple threads and the lid has an equal number of lugs or tabs that grip the corresponding threads; also known as “twist-off” closures.
Measurements for jars and lids are almost always in millimeters (mm). Don’t have a metric ruler? You can use a standard ruler or tape measure and convert it to metrics. Whether your jar has a CT or lug finish, you will measure it in the same manner. The distance (mm) indicated in the image above is what you will measure.
Are you interested in learning more about Buy personalised glass storage jars? Contact us today to secure an expert consultation!
If you don’t have a tool designed for this purpose, you can place some masking tape or some card stock to serve as a straight edge to take out the guesswork.
To measure lids (CT or lug), you’ll measure the diameter across the inside of the lid.
Once you know which size and whether or not it’s a lug or CT, you can move forward and choose the best lid for your process. Browse our selection of lids here.
We offer a variety of lids for many different uses. For example; We carry a CT metal closure that offers a shorter skirt/profile with F217 foam liner. This lid is ideal for candles, or bath & body products. It’s available in both 70/400 mm CT (which is a shorter profile lid) and 70/450 mm CT (a regular mouth style lid).
We do sell lids by the piece, however, our shipping is not subsidized by our product prices, so the cost of shipping of a few lids will seem quite disproportionate. So that we can properly track shipments once they leave our facility, we only ship UPS.
CAUTION…while we like to encourage responsible re-use of jars, we cannot recommend that you use jars of an unknown standard in your canning process. Many jars are not designed to withstand the pressure canner process and you may end up with product loss or suffer personal injury. Some may not even be able to withstand water bath. Please remember to keep the limits of your jars and/or lids in mind as you use them and re-use them.
*The specific measurements (all of them!) of the jar finish and of the lid finish matter. Be sure you are choosing a lid compatible with your jar by browsing from the “Accessories” tab of the jar in question. We link them in this way to avoid order errors. If you need to verify, be sure to contact our customer service team before ordering.
Want more information on Double Wall Coffee Cups Wholesale? Feel free to contact us.