A bearing is a mechanical component whose function is to guide a rotating assembly. The bearing therefore allows the rotation of one element relative to another.
Bearings are therefore high-precision parts that allow equipment to move at different speed levels by efficiently transporting notable loads. They must offer high precision and durability, as well as the possibility of working at high speeds with minimal noise and vibration.
For more information, please visit our website.
This type of device is found in all applications such as, for example, the automotive industry, the aerospace sector, construction equipment, machine tools, etc.
There are several types of bearings, the four main types are: ball bearings, cylindrical roller bearings, tapered roller bearings and needle bearings.
While ball bearings are the most common mechanisms, each device has its advantages and disadvantages. That is why we recommend that you compare each of these bearings to determine which is the ideal system for your requirements.
When choosing a bearing, you must consider several important factors. The first factor to consider is the load that the bearing can support.
There are two types of loads:
' axial load: parallel to the axis of rotation
' radial load: perpendicular to the axis
Each type of bearing is specifically designed to support an axial or radial load. Some bearings can support both loads: in this case we refer to a combined load. If you have to support a combined load, for example, we recommend that you choose a tapered roller bearing. If you need a bearing capable of withstanding a high radial load, then we recommend a cylindrical roller bearing. On the other hand, if your bearing needs to support lighter loads a ball bearing might be sufficient as they are often less expensive.
Rotation speed is another element that should be considered. Some bearings can withstand high speeds. The presence of a cage for cylindrical roller bearings and needle bearings allows for greater speeds than bearings without a cage. However, the choice of a higher speed is sometimes made at the expense of the load. You should also consider the possible presence of misalignment; some bearings are not suitable for this situation, such as double row ball bearings.
You will therefore need to pay attention to the bearing construction: insert and spherical bearings make it easy to support these misalignments. We suggest that you lean towards bearings with automatic alignment which automatically correct alignment defects caused by shaft bending or installation errors. Similarly, operating conditions are very important when choosing the ideal bearing. It is thus necessary to analyze the environment you will be using the bearing in. Your bearing may be subject to a number of contaminations. Some uses can lead to noise disturbance, impact and/or vibration.
Your bearing must therefore withstand this impact on the one hand and not be an inconvenience on the other. Another essential element to consider is the bearing life. Several factors, such as speed or repeated use, can impact the bearing life.
Choosing a sealing system is essential in order to ensure the correct and long-lasting operation of a bearing; it is therefore important to ensure that the bearing is always well-protected from any impurities and external agents, such as dust, water, corrosive fluids or even used lubricants. This choice depends on the type of lubricant, the ambient conditions (and therefore the type of contamination), the fluid pressure and the rotation speed. To give you a good place to start, the fluid pressure is a determining factor in the choice of sealing system. If the pressure is high (in the range of 2-3 bars for example) a mechanical seal is ideal. Otherwise, the choice will be directly linked to the type of lubricant, grease or oil. For example, for grease lubrication the most commonly used solutions are: deflectors or washers, narrow passages that are machined or with grooves; in the case of oil lubrication the sealing system is often accompanied by the presence of a groove for oil recovery.
Conditions of use can also influence your choice, especially when it comes to assembling the bearing. The rigidity and precision that your use requires must also be taken into account. In some cases, you can provide for the application of a preload in the assembly of your bearing to increase its rigidity. Additionally, the preload will have a positive impact on the bearing life and noise level of your system.
Be careful, in order to choose the preload (radial or axial) you must know the rigidity of all parts through software or experimentation. In your selection criteria, you must also consider the ideal material for your bearing. Bearings can be made out of metal, plastic or ceramic. The bearing material depends on its intended use. We recommend that you choose the most compression-resistant bearing. Keep in mind however that the material used affects the price of the bearing.
Each type of bearing can be deep-groove, spherical or insert. Deep-groove bearings are the most common. Insert bearings are deep-groove bearings which, like spherical bearings, effectively support misalignment.
If you are looking for more details, kindly visit Beijing SKF.
They differ from spherical bearings in that they have a smaller swivel angle. The larger the swivel angle, the more the bearing will withstand misalignment.
Another factor to consider: depending on the use, you will need a rotating shaft (for example wheel drive bearings for cars) or a rotating hub (like for washing machine bearings).
Then you will need to pay attention to how the bearings are assembled. If two bearings are too close together, you should use the O-assembly method so that the bearings do not interfere with each other. If this is not the case then the X-assembly method is perfectly suitable.
Finally, each bearing has specific dimensions. These dimensions, expressed in mm, are subject to international standards. We therefore advise you to pay attention to the bore of the bearing, i.e. the inner diameter (always represented by the letter d), the outer diameter (represented by the letter D) and the width (represented by the letter B).
The Outer ring for drawn cup needle roller bearings (DC type) is made of accurately formed cold-rolled steel strip. It is suitable for applications with limited space and housing that is not sufficiently hardened to serve as a raceway. There is no requirement for axial positioning when the DC needle roller bearing is pressed into the housing.
Needle roller bearings
TA Series
HK Series
The needle roller and cage assemblies are separate bearing elements. Each needle is precisely guided and held by a cage. It has the highest load-carrying capacity and high rigidity design in the smallest structure and space. The large distance between the two guide surfaces of the cage ensures precise guidance of the needle roller and cage assembly. Needle roller cage assemblies are suitable when the shaft and housing bore are used as raceways.
Needle roller bearings
KT Series
Solid ring needle roller bearings are compact in structure, small in the radial dimension, and high in carrying capacity. This is suitable for areas with limited radial overall size. It is also widely used for shafts or housings with oscillating motion. Needle roller bearings only bear radial loads and do not bear axial loads. When the shaft has an axial load, it can be used in combination with other bearings. However, it does not limit the axial displacement of the shaft or housing. Needle roller bearings have a low limit speed. When the main engine is running at high speed, try to use needle roller bearings with cages. Like other types of needle roller bearings, in the case of the same radial size, needle roller bearings have a large bearing capacity and high rigidity, but large friction torque.
Needle roller bearings