Do you want to set up a dinosaur Exhibit? There is something you should know before choosing the venue.
You will get efficient and thoughtful service from AMODINO.
There are two kinds of venues for the dinosaur exhibit, indoors and outdoors.
Indoor.
1. Is there a height limit?
2. Which floor?
3. Shall we use the elevator? In addition to elevator load-bearing information, interior size and height measurements, door height and width measurements are required.
4. It is necessary to walk through the path where dinosaurs are transported.
Ensure that the smallest door and aisle on the path that the dinosaur passed are the right size. Cut size depends on this.
A client whose dinosaur exhibit was on the 3rd floor noticed the elevator's size and weight bearing but the entrance. And the dinosaurs exceeded the door's size.
Finally, we solve the problem by lifting the dinosaur to the 3rd floor with an outdoor crane.
5. What's the load-bearing of the floor?
3m dinosaur is around 80kg and the giant animatronic dinosaur is over kg.
6. Does the venue have a flame retardant requirement?
Animatronic dinosaurs and Animatronic animals can choose flame-retardant sponge material.
7. Unloading location?
Is it possible to unload the dinosaurs directly into the arena? Can we use a forklift there?
The buyer must deliver the dinosaur to the installation site.
8. Unloading tools?
Shall we use the cranes there?
9. How about indoor lifting?
10. What are the installation conditions for hanging dinosaurs?
11. Power supply&#;
The voltage of the dinosaur is 220V (110V). Power needs to be provided to each dinosaur nearby.
If you want to learn more, please visit our website Dinosaurs Animatronics.
Outdoor
1. Electrical power
Power needs to be provided to each dinosaur nearby.
Electricity is also required for the installation process.
2. What is the local climate like? Is it hot or cold? Is it humid or dry? Are there strong winds?
Climates will affect the raw materials and installation of dinosaurs.
3. Dinosaurs should not be placed near water if possible.
Appliances can be corroded by water vapor.
4. Are there any restrictions on the size of outdoor exhibits imposed by the local government?
Our client wanted to display a 40m-long dinosaur as a landmark in his park. The government later stopped it because it was too tall. Pre-confirming the details with the tourism department in advance will avoid many inconveniences during production and installation.
5. Unloading tools.
Shall we use the cranes and forklifts there?
6. Unloading location.
Does the arena have a facility for the direct unloading of #animatronics #dinosaurs? Shall we use a forklift there?
Buyer in charge of #giantdinosaur model loading.
7. How to fix the giant dinosaur on the floor?
Do expansion screws work on the hardened ground?
Would it be okay if we pulled the wind ropes?
8. The big dinosaur above 8 meters needs a foundation and fix on the ground by expansion screws.
We will send the construction drawings to your team.
The #DinosaurExhibit is a large project, which requires a lot of energy and time. Should you have any questions or concerns, please do not hesitate to contact us.
As you may have seen in movies, many dinosaurs are depicted to be ferocious carnivores that might take you as their dinner. However, only 35% of the total dinosaur population were carnivores. Doing the math, we could conclude that 65% of dinosaurs were herbivores. This is due to the adaptations of their teeth and digestive [&#;]
The company is the world’s best Fiberglass Animals supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.